Parth Valves and Hoses LLP

Tufluor Ptfe Sil

Suction and delivery hose for food, cosmetic and pharmaceutical products, chemicals and solvents, except for chlorine trifluoride, chlorine and fluorine gas, oxygen difluoride, phosgene and molten alkalis (for ex. sodium). Designed for the chemical industry, foodstuff, pharmaceutical and cosmetic industry, where a flexible connection is required. The hose is produced with high quality elastomers, with excellent chemical and mechanical properties. Not intended for use as an implant material. Not suitable for blood or human fluids

DESCRIPTION

Tube : TEFLON™ PTFE, co-extruded clear/white pigmented, smooth, phthalates free, tested in compliance with 1907/2006/CE (REACH). TEFLON™ PTFE is a polymer with excellent resistance to high temperature, mechanical stress and to oxidation. It complies with FDA 21 CFR 177.1550 standards, USP XXXVI class VI, ISO 10993 Sections 5,10,11:2009, EUROPEAN REGLEMENT 1935/2004/CE AND 10/2011/CE, 3A Sanitary Standard Class II
Reinforcement : synthetic plies, stainless steel wire helices, on request a/s wires to discharge static electricity
Cover : smooth, silicone, white. Meets FDA CFR 21 PART 177.2600, BfR Recommendation XV, European Reglement 1935/2004/CE. Heat, abrasion, ageing and ozone resistant, glossy cover
Marking : TUDERTECHNICA TUFLUOR® PTFE SIL

TECHNICAL CHARACTERISTICS

Temperature range : 40°C / +150°C ( -40°F / +302°F ) The operating temperature of the hose is directly dependent upon the specific fluid been conveyed and the length of time the fluid is in contact with the hose.
Norm : ISO 1307 for dimensional tolerances

Inside diameter		Outside diameter		Vacuum		Length		Working pressure		Burst pressure		Appr. weight		Bending radius
[mm]	[in]	[mm]	[in]	[bar]	[psi]	[mt]	[ft]	[bar]	[psi]	[bar]	[psi]	[kg/mt]	[lbs/ft]	[mm]	[in]
13	0,50	24	0,94	0,9	13	10	32,5	10	150	40	600	0,47	0,31	45	1,77
19	0,75	30	1,18	0,9	13	10	32,5	10	150	40	600	0,61	0,41	70	2,76
25	1,00	36	1,42	0,9	13	10	32,5	10	150	40	600	0,76	0,51	90	3,54
32	1,25	43	1,69	0,9	13	10	32,5	8	120	32	480	0,93	0,62	120	4,72
38	1,50	50	1,97	0,9	13	10	32,5	7	105	28	420	1,26	0,84	140	5,51
50	1,97	62	2,44	0,9	13	10	32,5	7	105	28	420	1,60	1,07	180	7,09
63,5	2,50	79,5	3,13	0,9	13	10	32,5	6	90	24	360	2,69	1,80	320	12,60
75	2,95	91	3,58	0,9	13	10	32,5	5	75	20	300	3,24	2,17	380	14,96
100	3,94	117	4,61	0,9	13	10	32,5	4	60	16	240	5,06	3,39	580	22,84

Tusil Bright

Suction and delivery hose suitable for cosmetic, pharmaceutical and food products. Meets migration test according to BfR Recommendation XV & XXI Cat. 2. Not intended for use as an implant material. Not suitable for blood or human fluids.

DESCRIPTION

Tube : silicone, translucent, phthalates free, tested in compliance with 1907/2006/CE (REACH). Meets FDA CFR 21 PART 177.2600, USP XXXII class VI requirements, European Pharmacopoeia 3.1.9 Ed. VII 2011, ISO 10993 Sections 5,10,11:2009, BfR Recommendation XV & XXI Cat. 2, European Reglement 1935/2004/CE, DM 21/03/1973 e seguenti, Japan Ministry of Health and Welfare Notice No.370,1959, No.201,2006 and revision 2012, 3A Sanitary Standard Class II
Reinforcement : high temperature resistant plies, stainless steel wire helix
Cover : smooth, silicone, translucent, heat, ageing, ozone and abrasion resistant, glossy cover
Marking : TUDERTECHNICA TUSIL® BRIGHT

TECHNICAL CHARACTERISTICS

Temperature range : -60°C / +200°C ( -76°F / +392°F )
Norm : ISO 1307 for dimensional tolerances

Inside diameter		Outside diameter		Vacuum		Working pressure		Burst pressure		Appr. weight		Bending radius
[mm]	[in]	[mm]	[in]	[bar]	[psi]	[bar]	[psi]	[bar]	[psi]	[kg/mt]	[lbs/ft]	[mm]	[in]
13	0,50	24	0,94	0,9	13	15	225	45	675	0,46	0,31	60	2,36
16	0,63	27	1,06	0,9	13	14	210	42	630	0,53	0,36	70	2,76
19	0,75	30	1,18	0,9	13	13	195	39	585	0,60	0,40	80	3,15
25	1,00	36	1,42	0,9	13	10	150	30	450	0,73	0,49	100	3,94
32	1,25	43	1,69	0,9	13	8	120	24	360	0,89	0,60	130	5,12
38	1,50	51	2,00	0,9	13	7	105	21	315	1,21	0,81	155	6,10
51	2,00	64	2,52	0,9	13	6	90	18	270	1,56	1,05	210	8,27
63,5	2,50	78,5	3,09	0,9	13	5	75	15	225	2,32	1,55	260	10,24
76	3,00	91	3,58	0,9	13	4	60	12	180	2,72	1,82	310	12,20
102	4,00	117	4,61	0,9	13	3	45	9	135	3,55	2,38	420	16,54

Tusil Bright D

Delivery hose suitable for cosmetic, pharmaceutical and food products. Meets migration test according to BfR Recommendation XV & XXI Cat. 2. Not intended for use as an implant material. Not suitable for blood or human fluids.

DESCRIPTION

Tube : silicone, translucent, phthalates free, tested in compliance with 1907/2006/CE (REACH). Meets FDA CFR 21 PART 177.2600, USP XXXII class VI requirements, European Pharmacopoeia 3.1.9 Ed. VII 2011, ISO 10993 Sections 5,10,11:2009, BfR Recommendation XV & XXI Cat. 2, European Reglement 1935/2004/CE, DM 21/03/1973 e seguenti, Japan Ministry of Health and Welfare Notice No.370,1959, No.201,2006 and revision 2012, 3A Sanitary Standard Class II
Reinforcement : high temperature resistant plies
Cover : smooth, silicone, translucent, heat, ageing, ozone and abrasion resistant, glossy cover
Marking : TUDERTECHNICA TUSIL® BRIGHT

TECHNICAL CHARACTERISTICS

Temperature range : -60°C / +200°C ( -76°F / +392°F )
Norm : ISO 1307 for dimensional tolerances

Inside diameter		Outside diameter		Vacuum		Working pressure		Burst pressure		Appr. weight		Bending radius
[mm]	[in]	[mm]	[in]	[bar]	[psi]	[bar]	[psi]	[bar]	[psi]	[kg/mt]	[lbs/ft]	[mm]	[in]
10	0,39	22	0,87	-	-	16	250	48	750	0,35	0,23	-	-
13	0,50	25	1,00	-	-	15	225	45	675	0,41	0,27	-	-
16	0,63	28	1,10	-	-	14	210	42	630	0,48	0,32	-	-
19	0,75	31	1,22	-	-	13	195	39	585	0,55	0,37	-	-
25	1,00	37	1,46	-	-	10	150	30	450	0,68	0,46	-	-
32	1,25	44	1,73	-	-	8	120	24	360	0,83	0,56	-	-
38	1,50	50	1,97	-	-	7	105	21	315	0,96	0,64	-	-
51	2,00	63	2,48	-	-	6	90	18	270	1,24	0,83	-	-
63,5	2,50	76,5	3,01	-	-	5	75	15	225	1,68	1,13	-	-
76	3,00	89	3,50	-	-	4	60	12	180	1,98	1,33	-	-
102	4,00	115	4,53	-	-	3	45	9	135	2,61	1,75	-	-

Tusil Pure

Suction and delivery hose suitable for cosmetic, pharmaceutical and food products. Not intended for use as an implant material. Not suitable for blood or human fluids.

DESCRIPTION

Tube : silicone, white, phthalates free, tested in compliance with 1907/2006/CE (REACH). Meets FDA CFR 21 PART 177.2600, USP XXXII class VI requirements, European Pharmacopoeia 3.1.9 Ed. VII 2011, ISO 10993 Sections 5,10,11:2009, BfR Recommendation XV & XXI Cat. 2, European Reglement 1935/2004/CE, DM 21/03/1973 e seguenti, Japan Ministry of Health and Welfare Notice No.370,1959, No.201,2006, 3A Sanitary Standard Class II
Reinforcement : high temperature resistant plies, stainless steel wire helix
Cover : smooth, silicone, white, heat, ageing, ozone and abrasion resistant, glossy cover
Marking : TUDERTECHNICA TUSIL® PURE

TECHNICAL CHARACTERISTICS

Temperature range : -60°C / +200°C ( -76°F / +392°F )
Norm : ISO 1307 for dimensional tolerances

Inside diameter	Outside diameter	Vacuum	Working pressure	Burst pressure	Appr. weight	Bending radius
[mm]	[in]	[mm]	[in]	[bar]	[psi]	[bar]	[psi]	[bar]	[psi]	[kg/mt]	[lbs/ft]	[mm]	[in]
13	0,50	23	0,91	0,9	13	15	225	45	675	0,38	0,25	60	2,36
16	0,63	26	1,02	0,9	13	14	210	42	630	0,44	0,29	70	2,76
19	0,75	29	1,14	0,9	13	13	195	39	585	0,50	0,34	80	3,15
25	1,00	35	1,38	0,9	13	10	150	30	450	0,61	0,41	100	3,94
32	1,25	42	1,65	0,9	13	8	120	24	360	0,76	0,51	130	5,12
38	1,50	49	1,93	0,9	13	7	105	21	315	1,05	0,70	155	6,10
51	2,00	62	2,44	0,9	13	6	90	18	270	1,36	0,91	210	8,27
63,5	2,50	76,5	3,01	0,9	13	5	75	15	225	2,06	1,38	260	10,24
76	3,00	89	3,50	0,9	13	4	60	12	180	2,42	1,62	310	12,20
102	4,00	115	4,53	0,9	13	3	45	9	135	3,39	2,27	420	16,54

Silicone Hoses

Tufluor Ptfe Sil

DESCRIPTION

TECHNICAL CHARACTERISTICS

Tusil Bright

DESCRIPTION

TECHNICAL CHARACTERISTICS

Tusil Bright D

DESCRIPTION

TECHNICAL CHARACTERISTICS

Tusil Pure

DESCRIPTION

TECHNICAL CHARACTERISTICS

Catalogue

Valves

Hoses

Our Address